MAGY II is the best solution for solving problems in circuits due to particle pollution, in particular sand, magnetite and rust that form due to corrosion and scale during normal operation of a system.
OPERATING PRINCIPLE:
Through its efficient and constant action, the magnetic filter collects all the impurities present in the system, preventing them from circulating inside the system, thus avoiding wear and damage to the rest of the components that make up the system, especially circulators and heat exchangers.
MAGY II performs as a continuous protective action on the boiler.
USE:
It is recommended to install MAGY II on the return circuit at the boiler inlet to protect it from any impurities in the system, especially during the start-up phase.
Due to its compact size, it can be installed under the boiler in the domestic system where installation spaces are very limited and there is no space for other traditional dirt separators.
DEGREE OF FILTRATION:
MAGY II removes magnetic and non-magnetic particles that can cause system damage on the first day of operation.
Continuous passage of fluid through the filter during normal operation of the system on which it is installed gradually removes any dirt.
WARNINGS:
This filter contains a strong magnet and a strong magnetic field is present in it.
We recommend pacemaker device owners and/or maintenance. Be careful when using electronic equipment near magnets so as not to affect their operation.
CONSTRUCTIVE INFORMATION
Cartridge body: PP+30% Fiberglass Filter cover: PP+30% Fiberglass Filter cartridge: AISI 304 Oring ring seal: EPDM
Magnet: Neodim REN42 B=12000 Gauss
Magnet: B(T max) / B(T room)<1% (T max=120°C, T room=20.5°C)
Tested to ASTM A977 regulations
TECHNICAL INFORMATION
Compatible liquid: Water,Water + Glycol Maximum operating pressure: 3 bar Operating temperature: 0-90 °C Cartridge filter mesh: 800 µm Operating noise: 0 db (A) according to EN 13443
Reviews
There are no reviews yet.