OXIGEN ACTIV – 5 litres

Active oxygen for disinfecting pool water. Chemical treatment of pool water (replenishing water that has turned green or reddish-brown, ideal for water that is over-stabilised). Drinking water and waste water treatment . Environmental protection Product based on liquid active oxygen (hydrogen peroxide) is used for chemical disinfection of swimming pool water, acting at the same time as an algaecide, fungicide and water clarifier with a significant content of metal ions that in reaction with chlorine causes a sudden change in the appearance of pool water by changing the color to dark green or reddish brown. The addition of this product will quickly clear the water but will also neutralize the free chlorine in the pool, which is why a new chlorination shock will be necessary. It can be administered manually or with an automatic dosing pump. – This is a chlorine-free product, which means that it does not produce unpleasant derivatives (chloramines, stabilisers). – Compatible with all types of filters. – Does not foam. – Ideal for restoring water that has been over-stabilised. – Compatible with disinfectants and additional treatment products used in swimming pools, once diluted. – This product is not harmful to the environment at recommended doses – Long shelf life provided it is stored at a temperature below 30 C.

PROPERTIES:

Tip:…………………………………………………. 50

Appearance: …………………………………………… clear liquid

Color:…………………………………………. .colourless

H2O2 content:…………………………… .50%

Stability at 96 C:………………………….. ..5%

Miscibility: …………………………………… .100%

pH :………………………………………………. ..1,0-3,0

Density 20 C,-/cm3…………………………1.19

Boiling point – C:…………………………. .114

Melting/ingestion point – C:…………….. .-52

INSTRUCTIONS FOR USE: Check the pH level (should be between 7.2 and 7.8). Use pH-Minus to decrease the pH level, or pH-Plus to increase the pH level. Also check TAC (alkalinity) and adjust between 80 and 120 mg/l if necessary. DOSAGE: 2 litres of product per 20 m3 of water directly in the pool, rolling filter system, for initial treatment (shock treatment). 24 hours later, introduce disinfectant, 1 litre product per 20m3 of water maintenance treatment every week. Attention! : If the water has previously been treated with chlorine, use a neutralisation product. The level of OXY ACTIV can be controlled with test strips and should be between 20 ppm and 40 ppm H2O2 peroxide – for algae use an anti-algae product. Reper: 1 ppm=1 mg/l

STORAGE: Store in a cool, well-ventilated area away from incompatible substances and heat sources. The product must be kept away from contact with organic or mechanical impurities, as these promote decomposition.

HAZARDS IDENTIFICATION: Risk phrases: R 5 – danger of explosion by heat. R 8 – fire hazard in contact with combustible materials. R 20/22 – harmful by inhalation and if swallowed. R 35 – causes severe burns. Safety phrases: S 17 – keep away from combustible materials. S 26 – after contact with eyes wash immediately with plenty of water and consult doctor. S 28 – wash immediately with plenty of water after contact with skin. S36/37/39 – wear protective equipment and appropriate protective gloves, protect eyes/face properly. S 45 – in case of accident or if you feel unwell, consult a doctor immediately. (if possible, show the label) Danger symbol: O = oxidant C = corrosive Prohibitions: Do not eat or drink in the working area with liquid active oxygen solution. No smoking in working areas with liquid active oxygen solution. The information presented in this document reflects the highest level of expertise in this field.